Bullet Abbreviations and TermsAJHP: Aluminum jacketed hollow point bullet.
AP: Armor-piercing. Military bullets with steel or tungsten core that penetrates steel armor. Bullet tip is usually painted black for easier identification.
API: Armor-piercing incendiary. Designed to penetrate armor and set target on fire. Tips are usually painted light blue.
BBWC: Bevel-base wadcutter. Pistol bullet that is flat on both ends; has beveled base to increase accuracy similar to a boat-tail bullet.
BEB: Brass-enclosed base. Pistol bullet with brass plug over exposed lead base to reduce lead exposure. Many indoor ranges now specify use of this bullet to decrease lead contamination.
BJHP: Brass-jacketed hollow point. Defensive pistol bullet that controls mushrooming and energy release over longer distances.
BST: Ballistic Silvertip. Used with hunting rifles, this Winchester bullet has a soft metal tip that causes rapid expansion and penetration of bullet. Typically used for varmint hunting and hunting light- and medium-size game.
BT: Boat-tail. Rifle bullet with truncated conical shape at base of bullet. Streamlining stabilizes bullet and increases accuracy and range.
BTHP: Boat-tail hollow point. Same as plain boat-tail but with a hollow point, which generates rapid expansion and penetration. Note: some hollow-point bullets are designed for target shooting only and must not be used for hunting.
BTSP: Boat-tail soft point. Like the plain boat-tail but with a soft point to increase penetration and expansion from exposed lead tip.
BRPT: Bronze point. Bronze insert in tip improves trajectory, velocity and energy transfer at extreme ranges. Tip expands rapidly when driven back through bullet. Excellent design for hunting long-range medium-size game.
CC: Copper-coated. Same as full-metal-jacket. Copper coating prevents bullet deformation in feed mechanism and barrel, reduces misfires and lowers risk of barrel damage.
CP: Copper-plated. Lead bullet dipped in copper; reduces lead fouling and is cheaper than copper coating.
CL: Core-Lokt. Remington's premier bonded bullet. Retains up to 95% of original weight with maximum penetration and energy transfer. Progressively tapered jacket initiates and controls expansion nearly 2x. Unique design and bonded lead core delivers performance from 50 to 500 yards.
ENCAP: Encapsulated. Totally plated on all sides to decrease environmental lead contamination. Many indoor ranges use this ammunition exclusively to reduce lead clean-up costs.
EFMJ: Expanding full metal jacket. Federal's answer to areas with restrictions on hollow points. A regular full-metal-jacket bullet with front rubber core covered by a copper jacket. When fired into target media, copper jacket collapses along serrations, produces petal-like expansion and delivers energy without over-penetration.
EP: Expanding Point. Winchester-developed bullet for .25ACP for better stopping power for small calibers. Hollow point with round lead ball inserted into cavity ensures positive feed, increases expansion and transfers energy rapidly.
ERBT: Extended-Range Boat-tail. Remington bullet that produces long-range accuracy along with superior stopping power required for hunting.
FMC: Full-metal case. Lead core fully enclosed with copper, nickel, brass or steel.
FMJ: Full-metal jacket. Military round specified by Geneva Convention. Metal surrounds lead or steel core to prevent additional mushrooming of bullet, which may cause inhumane wounding. Usually has lead-exposed base.
FMJBT: Full-metal-jacket boat-tail. Like FMJ but has a boat-tail to reduce turbulence and increase accuracy.
FMJE: Full-metal-jacket encapsulated. Like FMJ but also has covered base and doesn't expose any lead.
FPJ: Flat-point jacketed. FMJ with a flat point. Most .40 S&W and .30-30 Winchester rounds have this design. The .30-30 Winchester has a tubular magazine and uses a flat-point bullet to prevent accidental detonation during recoil, as front round's primer may come in contact with point of round following it.
FNSP: Flat-nose soft-point. Similar to the FPJ but has lead-exposed point that expands on impact. Used for hunting.
FRAN: Frangible. Prevents ricochet by breaking apart on contact. Can be made from empty cartridge cases filled with epoxy and compressed birdshot, metal dust or filings. Developed for air marshals to avoid over-penetration and ricochet aboard airplanes. All energy is transferred to the target, making it a devastating defensive bullet.
GCK: Gas check. Metallic cup or disc is attached to bottom of lead-alloy bullet. Decreases gas blow-by, allows increased velocity and reduces lead fouling.
GDHP: Gold Dot hollow point. Speer's hollow point bullet with jacket bonded to lead core to prevent separation and control expansion and penetration.
GS: Grand Slam. Speer's design for hunting big game. Jacket is 45% bigger at base to prevent rollback and retain bullet's weight. Internal jacket flutes ensure proper expansion. Bullet's core is a ternary (three-part) alloy, which is poured into jacket at 900 degrees F to prevent jacket slippage.
HBWC: Hollow-base wadcutter. Preferred by some target shooters, this flat lead bullet with hollow base punches neat, round holes in paper targets and makes scoring easier. Creates better gas seal to prevent gas blow-by and increase velocity.
HSHK: Hydra-Shok. Federal's handgun defense bullet. Unique center-post design delivers controlled expansion. Notched jacket transfers energy efficiently and penetrates barriers while retaining stopping power.
HP: Hollow point. Hollow cavity in bullet's nose allows expansion on impact.
HPBT: Hollow point boat-tail. Rifle bullet with a truncated conical shape at base of bullet. Hollow cavity in nose allows expansion on impact.
HSP: Hollow soft point. Exposed lead point and hollow cavity in nose permits expansion on impact.
HV: High velocity. Ammunition with velocity over 1,200 feet per second.
JFP: Jacketed flat point. Flat lead point and full metal jacket. All .30-30 Winchesters have this bullet design. The .30-30 Winchester has a tubular magazine and uses a flat-point bullet to prevent accidental detonation during recoil, as front round's primer may come in contact with point of round following it.
JHC: Jacketed hollow cavity. Jacketed bullet with hole in tip to promote expansion on impact.
JHP: Jacketed hollow point. Jacketed bullet with hole in tip to promote expansion on impact.
JSP: Jacketed soft point. Jacketed bullet with hole in tip to promote expansion on impact.
L: Lead. An all-lead bullet.
LRN: Lead round nose. Solid lead bullet with round nose.
LSWC: Lead semi-wadcutter. Lubricated solid lead bullet with semi-pointed nose. Swaged to form sharp shoulder to produce clean holes in paper targets. Good choice for target practice or general shooting.
LSWCHP: Lead semi-wadcutter hollow point. Lubricated solid lead bullet with hollow point. Swaged to form sharp shoulder to produce clean holes in paper targets. Good choice for target practice or general shooting.
MB: Multi-ball. More than one ball or bullet in cartridge to increase hit ratio.
MC: Metal case. Same as metal-jacketed bullet.
MCH: Match. Bullets with most accurate design, weight, materials and consistencies. Used by snipers and target shooters.
MK: MatchKing. Made to exact tolerances by Sierra. Delivers record-breaking accuracy at long ranges.
MOLY: Moly-coated. Bullet is coated with molybdenum disulfide to reduce friction and increase velocity.
NBT: Nosler Ballistic Tip. Nosler developed this bullet with a polycarbonate tip that protects the bullet from damage in the magazine resulting from recoil. The tip also stabilizes the bullet for long-range shooting and insures reliable expansion when the bullet hits its target.
NP: Nosler Partition. Has two lead cores separated by bullet jacket. Top part of jacket is thin and promotes expansion of bullet. Bottom part of bullet has thicker jacket that retains bullet's weight, stops fragmentation and increases penetration.
PEP: Positive Expanding Point. Specially designed by Winchester for extreme accuracy and maximum impact on varmints and medium-size game.
PG: Partition Gold. Winchester's proprietary design delivers expansion and penetration on medium- and large-size game at wide range of impact velocities. Rear core is hard lead alloy, locked in place with a heel crimp to prevent core slippage and maximize penetration. Patented steel cup reinforces prevents core distortion at high-impact velocities.
PL: Power-Lokt. Remington's revolutionary varmint and small-game bullet produces bench rest-level accuracy. Copper jacket is electrolyticly bonded to lead core, producing near-perfect concentricity and gyroscopic balance, once available only in custom-made match bullets. Exceptional sub-minute-of-angle accuracy for small game at extreme ranges.
PP: Power-Point. Jacketed soft nose from Winchester delivers maximum energy on impact. Notches around jacket's mouth improve upset and ensure uniform, rapid expansion.
PSP: Pointed soft point. Pointed bullet retains velocity over long ranges. Soft nose initiates rapid bullet expansion. Jacket and core toughness vary according to caliber and weight of bullet.
PTDSP: Pointed soft point. Pointed bullet retains velocity over long ranges. Soft nose initiates rapid bullet expansion. Jacket and core toughness vary according to caliber and weight of bullet.
PTHP: Platinum-Tipped Hollow Point. A Winchester design for handgun hunters. Immediately transfers bullet's energy into target. Delivers penetration, expansion and accuracy.
PWC: Pointed wadcutter. Lubricated solid lead with pointed nose. Formed by swaging process with sharp shoulder for clean hole-punching in paper targets. Good choice for target practice or general shooting.
RN: Round nose. Round nose promotes positive, reliable feeding.
SBK: Sierra BlitzKing. Used for varmint hunting; has plastic tip inserted into bullet cavity, which expands on impact and delivers high ballistic coefficient.
SFS: Supreme Fail Safe. Hollow point bullet with lead core and steel insert. Delivers controlled expansion, deeper penetration and bullet weight retention.
SJHP: Semi-jacketed hollow point. Exposed lead tip expands more rapidly than jacketed hollow point design. Controlled penetration provides maximum energy transfer, making it suitable for hunting.
SJSP: Semi-jacketed soft point. Exposed lead soft point with reliable expansion and deeper penetration than hollow point bullets. Copper jacket and swaged lead core improve concentricity, balance and accuracy.
SLD: Solid. Usually made from copper, bronze or brass alloy - but no lead. Designed for deep penetration in thick-skinned animals.
SMP: Semi-pointed. Same penetration as a round nose with better trajectory, higher velocity and energy transfer, better expansion control and deeper penetration than a hollow point. At close range, usually offers better penetration and more controlled expansion. Excellent accuracy potential and often used for short- to medium-range hunting.
SP: Soft point. Exposed lead tip and broader point diameter provides rapid, controlled expansion at somewhat lower velocities.
SPCE: Soft point cutting edge. Semi-jacketed with cut-through jacket edge to partially lock in lead core. Deforms less in light game than heavy game. Used for clawed game hunting.
SPCL: Soft point Core-Lokt. Locks progressively heavier jacketed mid-section to lead core, preventing separation but allowing maximum energy transfer. Stays together on impact, expands in a controlled manner and mushrooms uniformly to nearly twice the original diameter.
SPT: Spitzer. Pointed bullet normally used in modern military rifles.
SST: Super Shock Tipped. Hornady's design incorporates a pointed polymer tip that improves ballistic coefficient and increases velocity, accuracy and downrange power. Specially designed jacket grips and controls expanding core, allowing maximum expansion while retaining mass and momentum.
ST: Silvertip. Winchester's design has special aluminum-alloy nose cap to protect lead core; delivers deep penetration and has controlled expansion in small- and medium-size game.
STHP: Silvertip Hollow Point. Winchester's handgun bullet designed for rapid, controlled expansion to penetrate thin skin, light muscle and bone of small- to medium-size game.
SWC/SW: Semi-wadcutter. Lubricated solid lead bullet with semi-pointed nose. Formed by swaging process, resulting in a sharp shoulder for clean hole-punching in paper targets. Good choice for target practice or general shooting.
SXT: Supreme Expansion Technology. Winchester's personal protection bullet. Designed with reverse tapered jacket, has uniform expansion, greater accuracy and reliable firearm functioning.
TAP: Tactical Application Police. Designed by Hornady specifically for law enforcement. Heavier bullet weight and polymer tip provide rapid expansion and excellent barrier penetration (without over-penetration).
TC: Truncated cone. Similar to an inverted cone, but with the top chopped off. Used in defense applications where penetration through materials might be necessary. Ensures extremely reliable feeding.
TCHP: Truncated cone hollow point. Same as truncated cone but with a hole in top to promote expansion in target.
TCSB: Truncated cone solid bullet. Designed for penetration. Inverted cone aids in feeding, while pointed solid bullet drives deep into target.
TMJ: Total metal jacket. Same as full metal jacket, except base is also jacketed.
TMWC: Target-master wadcutter. Wadcutter bullets made to highest tolerances to achieve best accuracy possible.
V-Max: Varmint Express ballistic tip. Hornady's ballistic-tip varmint bullet has a polymer insert that aids in rapid expansion once bullet hits target.
XTP: Extreme Terminal Performance. Hornady's personal-protection and hunting bullet.
There are no products matching the selection.